● Main spot light uses Cree XM-L2(U2) LED
● There are four versions of EU06 IMALENT. Each of them has some differences. But different color side lights may be the most obvious features as following:
EU06-RW - red and white;
EU06-RV - red and 405nm UV light. Design for police, law enforcement and currency detector;
EU06-WV - warm white (Cree XP-G2) and uv light. Mainly used as an scorpion finder and a currency detector;
EU06-10V - side lights are the same as the EU06-WV, while the main light is 365nm UV light. Widely used as a currency detector
● Location beacon mode: Featuring an extra location beacon mode in new created EU06-RV, EU06-WV and EU06-10V version
● Tripod mount gives a convenient and rapid way to fixed on
● Instant strobe even when the flashlight is power off
All versions are available!!
The above data has been measured in accordance with the international flashlight testing standards ANSI/NEMA Fl1 using one IMALENT 18650 3.7V 3400mAh rechargeable li-ion batteries under laboratory conditions. The data may vary during real-world use due to battery type, individual usage habits and environmental factors.
1. Battery installation
Unscrew the battery tube.
Insert 2pcs CR123A (3V) Lithium or one piece of 18650 rechargeable Li-ion battery with the positive (+) end pointing toward the flashlight head. Replace the battery tube.
EU06 is compatible with 2 pcs CR123A (3V) Lithium batteries and one pc 18650 Li-ion rechargeable battery. Every time inserting the batteries, built-in microcomputer of EU06 will automatically check the type of the battery and choose the best driving parameter and battery capacity testing parameter. The LED light and multi-functional display will be on for 3 seconds to indicate that the test is finished.
2. Brightness adjustment
Insert the battery with the positive (+) end pointing toward the flashlight head, press the power button, the light will enter turbo output, light will revert to high output mode if the turbo mode has been sustained continuously for 3 minutes.
With the white light turned on, use your finger to control the brightness level bars on the touch display (initial response time to activate the screen controls is not quite as fast as the touch screen on a smart phone). The output will be dimmer when you slide your finger toward the base of the light until one bar is showing and highest when you slide toward the head of the light and all bars are showing. As noted above, the model has memory function, the output will be memorized when the flashlights is off, and when you switch on the flashlight, the output will be the same mode as when you switched it off.
3.Lock and unlock the touch screen
Simple click the mode button to lock or unlock the touch screen.
4. Remote control operation
With the light on, put the remote controller towards any receiver on both sides of the flashlight head, press power switch on the remote controller to turn on and turn off the light, pressing mode button to transfer the light from main spot light to flood light to red light, press button to increase the brightness while press button to decrease the brightness，release your finger at any output level will save it.
5.Lock out function
To avoid accident operation, press the power button and mode button at the same time for 0.5 seconds until the white light flashes several times, the screen will be locked out and under standby mode, press the power button and mode button at the same time for 0.5 seconds again to unlock it.
|Dimension and Weight||
|Quantity||2+ units||10+ units||Dropship Price||More|
|Price/Unit||1||USD 103.00||2 ---- 9||USD 103.00||10 ---- 49||USD 103.00||50 ----- max||USD 103.00||Please submit your inquiry below|