Performance rivals CCD. Nice quality low cost.
Evening low light performance as excellent as highlight during the day.
Imaging parameters and the wide angle rigorous debugging for FPV.
Special cable connected the camera to image transmission,very convenient and concise.
Super lightweight,ultra-low power consumption,suitable for RC multicopter.
Can be mounted on frame,compatible with most of the 250mm frame.
Image settings have been FPV tuned through hours of flight testing to ensure great performance in challenging lighting conditions (no problem to fly in low afternoon sunlight).
Low power and light weight make this camera a perfect choice for smaller aircraft. Come with tiny 200mW 32ch FPV professional video transmitters.
Compatible with Immersion RC Boscam, Foxtech and other generic brand FPV receivers within the same frequency range.
Specification of Camera:
Lens: 2.6mm IR coated
FOV: 127 degree diagonal 110 degree horizontal (ideal for fixed camera)
Power Supply: 3.6-5.5V(powered by image transmission)
Type: PAL / NTSC (free switch)
Sensor: 1/3 CMOS
Operating temperature: -20 to 70 degree
Camera Size: 32 X 32 X 23.5mm
Lens Size (Length x Diameter): 15.3mm X 14mm
Usage: Compatible with general 5.8G transmitter
Specification of Image Transmission:
Item NO.: ET200
Modulation Mode: FM
Supported Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Output Signal Strength: 23 to 24dBm.
Output Power: 200mW
Operating Channel: 32CH
Operating Voltage: 7V - 24V
Operating Current: 190mA
Operating Temperature: -10~85
Video Band Width: 0 to 8.0 MHz
Video Input Level: 0.8 to 1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5 to 2.0 Vp-p
Audio Input Impedance: 10K Ohm
Sound Carrier: 6.5MHz
Antenna Connector: RP-SMA male
This 700TVL 1/3 Cmos FPV 110 Degree Camera supports free switching between NTSC and PAL. In other words, you will receive the same camera no matter which system you order. And please note that you need to turn off the electricity before switching or it may be failed.
|Dimension and Weight||