Continuously press on the Fire Button 5 times (interval time is less than 0.7s),it will goes to Locked Mode. You can't smoke of adjust the wattage under the Locked Mode. If the screen shows "LOCKE, CLICK 5X", you can turn on again by pressing the Fire Button 5 times.
Temperature Regulating Mode:
Continuously press the Fire Button 5 times, it will goes to Locked Mode. It will go to the Temperature Regulating Mode by Synchronously pressing on"+", "-" button 2s and then you will be able to adjust the device temperature(200℉-600℉). Selecting the "off" to exit the Temperature Regulating Mode and go back to the Ordinary Mode.
If it is Locked Mode, synchronously press on the Fire Button and "-" button 5s,it will go to the Stealth Mode. The screen only shows the Error message and Locked Mode message at present. It will go back to the Ordinary Mode by pressing the Fire Button and "-" button 5s under the Stealth Mode. The Stealth Mode was saved in the device system. So when the device is shut down under the Stealth Mode, it will stay the Stealth Mode once you turn on the Kamry 40 again.
Right Mode and Left Mode:
If it is Locked Mode, synchronously press on Fire Button and "+" button 5s, you can switch the display screen.
Power Locked Mode: synchronously press on "+" and "-" button 2s,it will go to the Power Locked Mode. Other operations are normal under this Mode, only you can't adjust or set up the Power Level. This Mode can avoid adjusting the wattage when the Kamry 40 is in the pocket and the temperature change. Synchronously press on "+" and "-" button 2s,it will exit the Power Locked Mode.
Automatically Power Off
When there is atomizer, it will automatically shut off the screen if no pressing any button over 30s and will go to the Sleep Mode. Then it will start to work if you press any button. If the Sleep Mode continues over 60 minutes, it will automatically power off.
When there is no atomizer, it will automatically shut off the screen if no pressing any button over 30s.When the screen is shut off over 5 minutes, it will automatically power off if there is no atomizer or no pressing on any button.
Manual Power Off
Synchronously press on "+", "-" button 5 times (interval time is less than 1s), it will power off. Press on Fire button 5 times to turn on(Tips: if it is Manual Power Off mode, the atomizer coil temperature may change after turning on for a moment, so it may remind you to select the atomizer resistance again)
Over Heating Protection
If the chip temperature is too high, it will automatically adjust the wattage to 25W (but it won't show it on the screen).If the chip temperature turns under the alarming level, the working wattage will become normal.
Atomizer open:It can't detect the atomizer, or the atomizer resistance can't match with the setting wattage.
Shorted: atomizer shorted or power shorted.
Check Battery: if the battery voltage is less 3.3V, it will remind to recharge.
Weak Battery: when press on the Fire Button, if the battery voltage declines fast, it means you have to replace the high rate battery.
New Coil Up Same Down: If you use new atomizer, please select "up", if the atomizer is the same, please select "Down".
Ohms Too High: The atomizer resistance is too high to match with the body.
Ohms Too Low: The atomizer resistance is too low to match with the body.
Hold To Change Temp: Tips for going to the Changing temperature Mode.
|Dimension and Weight||