GBX210 210mm Carbon Fiber DIY Frame Kit RC Racing Drone with DYS Fire 2206 Motor / XS30A ESC / SP Racing F3 ACRO 6DOF FC
Shipping & Payment
Specifications: Carbon Fiber Frame Weight: 92g Wheelbase: 210mm Size: 190 x 180mm Height: 35mm Arm length: 5 inches Upper / lower plate thickness: 4mm Lateral board thickness: 2mm Other board thickness: 1.5mm PDB with 5V / 12V BEC and XT60 plug
F3 ACRO 6DOF with OSD Panel color: black Board size: 35 x 35 x 8mm Net weight: 23g
DYS XS30A BLHeli-S 3 - 6S LiPo ESC MCU: high-performance EFM8BB2 50MHz MCU Weight: 8.65g Size: 45 x 16.5 x 5.8mm BLHeli-S does Damped Light Firmware upgradable via signal wire ( works with USB connector for XM series ) Supports motors with super high KV ( EFM8BusyBee 50MHz can handle up to 500k eRPM ) Supports 1 - 2ms signal, Oneshot125, Oneshot42 and Multishot High-current burst rating High-resolution throttle steps
DYS Fire 2206 2300KV 3 - 6S Motor Thrust: 1450g Motor size: 27.7 x 17.7mm ( diameter x height ) No. of cells: 3 - 6S LiPo Weight: 31.69g Imported ISC bearing N54 magnets, M5 hollow shaft 0.1mm lamination
FOXEER TM25 5.8G 40CH Transmitter Model: TM25 Switcher Video format: NTSC / PAL Output impedance: 50 ohm Output power: 25 / 200 / 600mW Input voltage: DC 7 - 24V Output voltage: DC 5V Operating temperature: -10 to +85 Deg.C Video band width: 0 - 8.0MHz Audio carrier frequency: 6.5MHz Video input level: 0.8 - 1.2Vp-p Audio input level: 0.5 - 2.0Vp-p Audio input impedance: 10k ohm Connector type: SMA Size: approx. 41 x 25 x 7mm / 1.6 x 1 x 0.3 inches Net weight: 12g
FOXEER HS1189 XAT1200M FPV Camera Model: HS1189 XAT1200M Image sensor: 1/2.7 inch CMOS Resolution: 1200TVL Camera system: PAL / NTSC Total pixels: 1280 ( H ) x 960 ( V ) Min. illumination: Color Mode: 0.05lux ( F1.2, 50 IRE, AGC ON ); BW Mode: 0.001lux ( F1.2, 50 IRE, AGC ON ) 2D-DNR: 0 - 100 3D-DNR: 0 - 100 Sense-up: yes Image adjustment: yes BLC / HLC: yes WDR: built-in S/N ratio: more than 50dB White balance: auto Day / night switch: Auto / External Control / Color / Black and White Private shading: yes Language: Chinese / English Video out: 1.0Vp-p, 75 ohm Input power: 5 - 22V Working temperature: -20 to 60 Deg.C Working humidity: relative humidity less than 90 percent Size: 26 x 26mm
5045 3-blade Propeller Quantity: 10 pairs Mounting hole: 5mm Size: 140 x 140 x 65mm
27.7 x 17.7mm ( diameter x height )
No. of Cells
3 - 6S LiPo
1280 ( H ) x 960 ( V )
Dimension and Weight
Product size (L x W x H)
19.00 x 18.00 x 3.50 cm / 7.48 x 7.09 x 1.38 inches
Package size (L x W x H)
27.00 x 17.00 x 8.00 cm / 10.63 x 6.69 x 3.15 inches
1 x GBX210 Carbon Fiber Frame, 4 x Motor, 4 x ESC, 10 x Pair of Propellers, 1 x Camera, 1 x Flight Controller, 1 x Antenna, 1 x FPV Transmitter
Product Safety Disclaimer:
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
Small Parts Disclaimer:
These toys contain small parts, not for children under 3 years in case of swallowing or choking . We do not accept any responsibility or liability for misuse of this or any other product.
If you have any questions about this product, delivery, payment options, etc, please feel free to submit your enquiry. We will reply to you within 24 hours.