It doesn't have the DC/DC converter, this means less heat when powered off a flight controller.
You can connect two batteries up to 4S, so that you can see the main flight battery voltage.
The second port will allow your FPV battery voltage on the display as well.
No DC/DC converter, power board via 5 volts.
Standard 6-pin ISP header.
Two LED indicators.
ATmega328P with Arduino bootloader.
MAX7456 monochrome on-screen display.
Pad for an analog or digital PWM RSSI signal.
Pad for the connection of a current sensor.
Standalone, or with APM / Flip / Flip32 + flight controllers.
These modifications allow direct connection of two batteries ( Up to 4S ).
This hardware takes the hardware mods for this firmware, and builds them into an RTF solution.
This Board can be used just as a normal OSD for APM or it can be used with MWC KV Team Mod.
Two independent power sections with an LED indicator on each.
Solder jumpers for combining the power sections.
Solder jumper for PAL video option.
|Dimension and Weight||
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for the incorrect purchase of our products. All of the products on the website are extensively tested to comply with rigorous and strict QC standards. For all of our clothing products, items and accessories, please take careful note of the precise measurements, mainly shown in centimeters (CM). As part of our company policy, we will not be able to accept returns or provide refunds for items which are the wrong size.