Equipped with Evolv DNA200 chip
With Evolv's Escribe software, dial in your perfect vape with over 93 options
Work with triple 18650 mod ( not included )
Genuine leather wraps on magnetic battery cover
Output wattage: 1 - 200W
Temperature range: 200 - 600 Deg.F
Reverse polarity protection
Pass-through charging function
Carefully placed operating buttons
Integrated 1A micro USB cable ( included )
Stainless steel 510 atomizer connector
Spring loaded nickel plated brass center pin
Zinc alloy construction
The DNA 200 directly measures and limits the temperature of the heating coil during operation. By preventing the coil from becoming too hot regardless of fluid, wicking or airflow, a variety of undesirable situations can be prevented. For example, appropriate temperature settings will prevent the wicking material from charring, which compromises taste and introduces unintended chemicals into the vapor. Appropriate temperature settings will also reduce the breakdown of flavoring and base liquid components, which could impact taste or safety.
Temperature protection is most helpful if the atomizer begins to dry out, the user pauses during a puff, the beginning or end of the puff, or if the wattage setting is inappropriate for the attached atomizer.
When the DNA 200 is used with a temperature sensing atomizer, an additional feature called Preheat is activated. No vapor is produced when the temperature is below the boiling point of the liquid. Preheat applies extra power until the heating coil is up to operating temperature to shorten the delay between pressing the fire button and generating vapor. Because preheat is temperature based, it will not overheat or burn the vapor.
Escribe is a software package used to configure and modify the operation of your DNA 200. It installs on a Windows PC and connects to your DNA 200 using the USB port.
When you connect your DNA 200 to the PC, press the "Connect and Download Settings" button to download the settings presently on your device to Escribe. After you make changes, press the "Upload Settings to Device" to save the new settings to the device.
The batteries and atomizers showed in the pictures are not included in the package.
|Dimension and Weight||