ThruNite Catapult V5 UT 1200Lm Cree XPL HI 18650 CR123 LED Flashlight
Shipping & Payment
Description: The Catapult V5 UT, the upgraded version of the Catapult V5, utilizes the latest CREE XPL HI LED and optimizes beam distance up to 837 meters. As the appearance communicates, the Catapult V5 UT features durability and reliability that provides all an advanced EDC or a tactical flashlight can offer. Therefore, for those who are looking for a reliable and powerful thrower, our ThruNite Catapult V5 UT will be a best choice.
Main Features: ● Adopts an advanced CREE XP-L HI LED, max 1200LM output ● Smooth reflector for an optimized throw, max beam distance up to 837M ● Dual switch with LED indicator to inform low voltage ● 5 modes:Turbo - high - mid - low - strobe Turbo (1200LM 91min) - high (580LM 183min) - mid (310LM 400min) - low (73LM 1758min) - strobe (1200LM 100min) ● Aircraft grade aluminum body with tactical knurling for firm grip ● Premium type III hard anodized anti-abrasive finish ● Ultra clear tempered glass lens with anti-reflective coating ● Stainless steel strike bezel for defense and emergency applications ● Reverse polarity and overheat protection to protect battery and flashlight
Operation: Counting from the bezel, there are two switches S1 and S2 Turn ON / OFF Single press S2 to turn the flashlight on / off Change Mode ● With the light is on, single press S1 to cycle through 4 brightness levels; Long press S1 to enter Strobe ● When the light is off, press and hold S1 for more than 3s to get Constant Strobe or release in 3s to turn off the light (note: The frequency of constant strobe mode on Catapult V5 UT is between 5.5Hz and 13 Hz. But if you press and hold S1 and do not release, the strobe frequency is 13Hz) Memory Function When the light is off, single press S1 to get the last mode accessed (memory-on function except for Low, Turbo and Strobe) Lock-out Function ● Press and hold S2 for more than 3s, the flashlight will flash twice to inform entering lock-out mode ● Press and hold S2 for more than 3s, the red LED to indicate the light is unlocked ● If press more than 6s, the flashlight will go back to the original setting, which means that it need to be unlocked again (note: If the flashlight cannot be turned on with full batteries, please CHECK if it is locked out.) Use with Remote Pressure Switch (not included) ● When the light is on, press and hold S2 and S1. The light will flash twice to indicate entering Remote Switch Mode and the LED indicator will be purple ● When the light is in Remote Switch Mode, press and hold S2 and S1, the light will flash four times to turn back to normal use and the LED indicator will be blue Battery Replacement Take off the tail cap, insert the battery with the anode (+) toward the LED assembly (head of the light), screw the tail cap on and tighten it all the way to operate the light (warning: Do NOT use four 16340 batteries for Catapult V5 or you will exceed the working voltage limit) Power Indicator: ● Normal operation - Blue: Power less than 40pct - Purple: less than40pc (only at Remote Switch Mode will be purple) - Red: Power less than 20pct - Red flashes: Power less than 10pct ● Abnormal operation When the flashlight cannot be turned on but has the following performance, you may need to fix it with guidance - Quick purple flashes (within 0.1s): The flashlight is short-circuit - Medium purple flashes (within 0.5s): There is open-circuit in the light - Slow purple flashes (within 1s): The battery voltage is too high and exceeds the limit - Slow purple flashes (within 1s, but the flashlight is on): The thermistor is broken
Cree XP-L HI
Anti-Roll Rugged Design,Cooling Slot of High Efficiency,Lanyard,Power Indicator