Dot matrix display of wireless remote control, cool graphics tail light display of wireless remote control, brake dot matrix display of wireless remote control, laser parallel lines display of wireless remote control. A Multifunctional magic cycling indicator, LEADBIKE A112 Wireless Remote Control Bicycle Turn Light, increase the safety of riding. Try it, you will not feel disappointed.
- A perfect combination of direction indicator and warning light, makes night riding safer
- Intelligent wireless remote control design, convenient to operate
- Equipped with USB cable
- 64 LED light, 2 laser beam, 8 indicating patterns
- 3 Modes: Laser Lights / Tail Lights / Turn Signal Lights
- With Rechargeable built-in lithium battery, 3.7V 650mAh. It can work up 10 hours continuously after one time charge
- One CR2023 battery ( included) for remote control, which can work up to three months
- Water resistance design, no worry about rainy days
- Suitable for mountain bike, road bike
1. Long press host one second to switch on (all the lights flash three times), and long press host one second again to switch off (all the lights flash one time). The left light is flashing after switch on, long press 3 seconds to Match Code (host showed C), then press any key of the remote controller to finish the setting.
2. Upward the turn light-switch to Left (the left light is flashing), downward the turn light-switch to Right (the right light is flashing).
3. Short press the right button of remote control, cool graphics tail light will switch on / off.
4. Short press the left button of remote control, laser parallel line will switch on / off.
5. All the lights of the host will lighten on when to brake the bicycle.
6. When the left light of host is continuous lighting, it means the low battery and needs to recharge. The right light will turn on when recharging the battery, and the green light will turn on when fully charged.