Skyrc program box is a very sophisticated electronic device that controlled by high performance microprocessor.
When you want to program the ESC precisely, we used to connect it to the PC. But sometimes, when you are running cars outside, it is not convenient to take PC, even laptop with you. At this time, you could use this device as program box to set all the parameters of ESC with maximum precision. Simply plug connect it to the ESC and set all parameters precisely in a short time as you wish
PC interface ( Link ESC to PC )
What's more, it can also work as Skylink, an USB adapter which can be used to link the ESC with a PC, and you can update the firmware of the ESC or programming the ESC by Skylink software on PC
Input PPM signal monitor
PPM signal monitor function enables you to check the output voltage of the receiver and the radio's PPM signal width and frequency
No need to power on your transmitter, you could check the servo function easily. Connect the servo to the program box, get the information of input voltage, servo travel position and peak current. There are two modes: One is swing mode and the other is manual mode. Both modes are easy to operate
Motor KV / RPM tester
Wondering about your motor information? Connect your motor to this small device, input initial setting, move the throttle of the transmitter, then you can read the value of motor KV, RPM and input voltage on the screen
LiPo battery monitor
It is also a very good device to check your LiPo battery situation at any place. You could use it to check the total cell number, total voltage, each cell voltage, highest voltage and lowest voltage and the voltage difference between the highest voltage and lowest voltage
User manual, please click here
Input current: 200mA
Input voltage: 6 - 10V DC
Suitable for: SK-300044, SK-300045, SK-300062, SK-300052, SK-300048, SK-300047 ESC
Note: The other gadgets in the picture are not included
|Dimension and Weight||
We do not accept any responsibility or liability for misuse of this or any other product. All our products are extensively tested to comply with rigorous and strict QC standards. For certain products (e.g. toys, knives, etc.), we recommend proper supervision as we cannot be held liable for misuse or accidents.
We do not accept any responsibility or liability for the incorrect purchase of our products. All of the products on the website are extensively tested to comply with rigorous and strict QC standards. For all of our clothing products, items and accessories, please take careful note of the precise measurements, mainly shown in centimeters (CM). As part of our company policy, we will not be able to accept returns or provide refunds for items which are the wrong size.
Product photography is for illustration only. The product sold may have minor physical differences depending on manufacturer specifications, production batch, etc. Customers should carefully consider this before purchase.